Solar Re-Roof

Panels off. New roof.
Panels back.

San Diego put solar on hundreds of thousands of roofs — many of them roofs that would need replacing before the panels do. We re-roof under existing solar: detach, new roof, reset, recommission. One contractor responsible for the roof, the penetrations, and the panels being back online.

How it works

One job. Four stages. One warranty.

01

Document & detach

Panel layout photographed and mapped, system safely shut down, panels and racking removed and staged.

02

Re-roof

Full tear-off and new roof under where the array sat — the section that’s hardest to ever touch again.

03

Reset & flash

Racking remounted with proper flashing at every penetration — where most solar leaks are born.

04

Recommission

Panels back, system verified producing, one warranty covering the roof and the penetrations.

Re-roof under solar panels in San Diego — after
Re-roof under solar panels in San Diego — before
BeforeAfter
Why one contractor matters

No finger-pointing
between trades

When a solar company and a roofer split the job, every future leak becomes a debate about whose penetration it was. When one licensed roofing contractor owns the whole assembly, there’s nothing to debate — and nobody to chase.

Straight answers

Questions we get

Should I replace my roof before installing solar?

If the roof has less life left than the panels do — almost always yes. Panels last 25+ years; putting them on a 15-year-old shingle roof schedules an expensive detach-and-reset in your future. Roof first, then solar.

A leak showed up under my solar panels. Who fixes it?

The roofer. The leak is in the roof — usually at a mounting penetration — not in the panels. Both trades pointing at each other is exactly the runaround this service exists to end: one contractor, responsible for the whole assembly.

Can you re-roof around the panels?

The rest of the roof, yes — but the section under the array needs the panels off to be done right. Roofing around an array leaves the oldest roof under the hardest-to-reach spot.

Do you handle the panel removal yourselves?

Detach and reset is managed as part of the job, with the electrical recommissioning verified at the end. You make one call and get one bill — no coordinating two contractors who’ve never met.

Roof aging under your array?

Call the roofer, or send the form and he’ll call you. Either way you talk to the person who does the work.

Powered By